Electric Fireplace Wall Hanging Ideas
In contrast to traditional wood or gas fireplaces Wall-mount electric fireplaces can be hung right out of the box. Electric fireplaces are an excellent way to add ambience to your home without the need for renovations or venting.
However, they typically require careful installation because they're typically heavy. Follow these steps to hang your new electric fireplace correctly.
- Connect the Brackets
A wall-mounted electric fireplace or recessed electric fire instantly transforms any room. It's the ideal solution for homes that don't have an existing fireplace opening, or for apartment residents.
First, decide where fireplacesandstoves 'll put your new electric fire. It's crucial to select an area that isn't susceptible to moisture and is at least a few inches away from furniture, drapes and high traffic areas. Once you've found a spot to mark the wall, you can use markings for the top and bottom plates of the fireplace frame.
Use a tool, such as an electric drill to drill exploratory holes in the wall, checking for studs with a detector, and then marking the drywall the fireplace mounting bracket locations. Next, build out the wall or patch and paint the drywall to prepare it for fireplace installation.
Depending on the fireplace mounted to the wall you choose, you may need to install both the firebox and screen as one unit, or separate them with a wall bracket. If you're not sure about your ability to finish this project you can hire a general contractor or an experienced carpenter.
Most electric fireplaces include a template for the installation process, but you should also have a spirit level and pencil in hand to precisely mark the location in which you'll mount the wall brackets. Utilize the template to ensure that the power cable of the fireplace is able to connect to an outlet nearby to connect it.
Once the studs and fireplace frame are in place, you can put in a drywall that is as smooth and flush as you can to give a neat appearance. Add a trim piece to the bottom edge, and then sand and paint the entire frame for a finished appearance.
You will need to insert the slots or hooks on the back of many wall-mounted electric fireplaces into the brackets for mounting. Make sure to make sure that the slots or hooks are aligned prior to connecting the brackets for your fire. Once the fire is in place you can add other elements like driftwood logs crystal embers or decorative rocks.
- Check the Bottom Bracket
The space above a fireplace mantel, chimney breast, or mantel is a prime spot for hanging artwork. There is a fine balance between an artistic arrangement and one that doesn't detract from the overall design of the fireplace.
A general rule is that a photograph should cover 80percent of the length of the mantel or fireplace it sits over. This will help keep it in proportion and look great on the wall. Other ornaments & decorative items placed on the mantel can affect the size and proportional guidelines.
If you're planning to put an image above your electric fireplace, it's crucial that the frame is made of glass or other material that can withstand high temperatures. If you're not sure then a quick test using a cloth that is heat-sensitive will reveal whether the frame is suitable for this kind of use.
The most common issue with displaying pictures above a fireplace is the risk of damage to the artwork from smoke or stray heat. This is not a problem with a wood- or gas-powered fireplace. However, if you plan to use an electric wall fire it is important to read the instructions provided by the manufacturer.
Most electric fires are equipped with a mounting bracket which can be fixed to the wall by hanging screws or wall-mounted fixing systems. It is recommended to drill an exploratory hole into a discrete area of the wall prior installing your electric fire. You can then make use of a cable and pipe finder to ensure that there aren't any cables or pipes near the position of mounting.
If so, you can either mount your fire over the electrical socket or move it to a new spot. If you decide to move it to a new spot it is important to ensure that the power cable can be able to connect from the fire to the electrical outlet – this is especially important for older homes or houses with solid walls. If you don't, the electric fireplace won't function effectively. Some models come with an outline of the locations to drill holes, while others require a spirit level and pencil to mark the location on your wall.
- Connect the Power Cord
It is possible to relocate your plug socket behind the fireplace if you've installed a recessed fireplace. This will give it a more sleek appearance. First test the fireplace to make sure it is operating correctly.
The third option to install an electric fireplace is by framing the space and constructing it into the wall. This gives you a classic, finished look and allows the installation of an optional mantel. The owner's manual for your particular model will provide information about framing, securing the fireplace, and wiring.
Mark the location of your new electric fireplace on the wall using the help of a pencil or marker. Use a carpenter's level to make sure that the area of installation is level and flat. You can use a studfinder mark the location so you know that you're drilling in a safe location.
Use the electric drill after you have marked the installation location to create holes for the bracket screws or hanging screws. Follow the instructions in the owner's guide to this step. This is especially important if you're putting the fireplace in the drywall. If you're not sure of how to do this you can always consult an expert to take care of the installation for you.
You can also hide power cords from view by using cable organizer kits. These kits typically include sleeves, clips or boxes to bundle cables. You can also use wire snake tools to guide the cables through the wall. If you don't want to cut into the wall, a powerbridge kit can provide a more secure and more secure connection.
You can also disguise cords using paintable wire covers, or by attaching them to the wall. Make sure to keep the cover or tacks away from the heat source, however. This will protect the cord from being damaged and will also prevent accidental contact.
- Connect the adapter
A wall-mounted electric fireplace is a great alternative for home renovations or for those who do not have the space or the money to put in a gas fireplace. They are simple to hang and ready to use straight out of the box. They are an excellent alternative to those looking for an elegant, modern look or warmth from a fireplace. These units can be hung on any wall as artwork, and they're powered by a fan to provide heat.
Before you start the actual installation process, it's a good idea to take stock of all the equipment and tools you'll require. Check the user manual for specific information about how to install your electric fire. Some models require that you screw brackets directly into the wall, while others could have a mounting plat that slides into slots or hooks onto the brackets. It is important to remove all combustible material from the area where you'll be installing a recessive unit. As a rule of thumb they should be kept 3 feet away from the front side of the fireplace and 1.5 feet from its sides.
After you have checked all the parts After you have checked all the components, plug in your electric fire and make sure it is working. This is an essential step, as it will ensure that the flame effect screen and heater function as intended. This will give you a good idea of the final product's final position.
When you're sure that your electric fireplace is operating properly, you must think about covering the power cord. This will help keep the finished product neat and tidy. This can be accomplished by applying paintable wire covers, or install an outlet that will allow you to tuck the cord behind the unit. This will give a seamless finish to your fireplace.